1. Grassroots Governance towards Transparency and Development
Dr. Akhilesh Pal – Iswar Saran PG College University of Allahabad Prayagraj
Page No: 1-19
DOI:19.18001.AJCT.2019.V12I7.19.10000
2. Control and Analysis of Multilevel Invereters Using Different PWM Modulation Topologies
Dr.K.Srinivas – JNTUH College of Engineering Jagityal, Jagityal, Telangana,India
Page No: 20-24
DOI:19.18001.AJCT.2019.V12I7.19.10001
3. Descriptive Analysis of Signature Identification and Verification System
Navdeep Kaur – Chandigarh Engineering College, Landran, Punjab
Page No: 25-29
DOI:19.18001.AJCT.2019.V12I7.19.10002
4. PROMOTION OF ENTREPRENEURSHIP THROUGH EFFECTUATION PROCESS – ROLE OF INFORMAL FINANCE
Mamatha S and Dr. Subramanyam Mutyala – REVA University, Bangalore.
Page No: 30-38
DOI:19.18001.AJCT.2019.V12I7.19.10003
5. A SURVEY ON HANDOVER ALGORITHMS IN HETEROGENOUS WIRELESS NETWORK
Mr.Mithun B.Patil, Dr Rekha Patil – PDACE,Kalburagi Karanataka ,India
Page No: 39-41
DOI:19.18001.AJCT.2019.V12I7.19.10004
6. pH and Temperature Responsive potassium polyacrylate Hydrogel used in drug delivery
Nitish Jha, Dr. Sameer Wagh, Dr. Pratibha Gupta – Laxminarayan Institute of Technology, RTM Nagpur University, Nagpur
Page No: 42-50
DOI:19.18001.AJCT.2019.V12I7.19.10005
7. Voltage Regulation of Distribution Grid Using DSTATCOM with PI and DQ Control Techniques
Dr.K.Srinivas – JNTUH Jagityal,Karimnagar,India
Page No: 51-56
DOI:19.18001.AJCT.2019.V12I7.19.10006
8. A STUDY ON CDR SYSTEM IN INDIAN & CHINA ECONOMIES
Dr.B.Saritha, Mrs. Seema Nazneen – MG University, Nalgonda., Osmania University
Page No: 57-62
DOI:19.18001.AJCT.2019.V12I7.19.10007
9. A Design of Dynamic Voltage Restorer (DVR) With Battery Energy Storage System
Dr. P.Vasudeva Naidu, P.Anil Kumar, GVSSNS Sarma, Tejaswi, Nikitha – Matrusri Engineering College, Hyderabad, Telangana, India
Page No: 63-70
DOI:19.18001.AJCT.2019.V12I7.19.10008
10. PARALLEL IMPLEMENTATION OF IMAGE MATCHING
Mariya Paul, Sheena S – Cochin University of Science and Technology Kochi, Kerala, India.
Page No: 71-81
DOI:19.18001.AJCT.2019.V12I7.19.10009
11. Implementation of Taguchi Based Utility Approach for the Optimization of Drilling Process Parameters
Ch. Dipak Kumar, V. Bindu Neeharika, Ch. Maheswara Rao – ANITS, Visakhapatnam
Page No: 82-90
DOI:19.18001.AJCT.2019.V12I7.19.10010
12. PROMOTION OF ENTREPRENEURSHIP THROUGH EFFECTUATION PROCESS – ROLE OF INFORMAL FINANCE
Mamatha S and Dr. Subramanyam Mutyala – REVA University, Bangalore.
Page No: 91-99
DOI:19.18001.AJCT.2019.V12I7.19.10011
13. “A STUDY OF OPERATING EFFICIENCY OF INDIAN SCHEDULED COMMERCIAL BANKS: A COMPARATIVE ANALYSIS”
Dr. Suchita Shukla, Shadab Alam – STEP-HBTI (KANPUR)
Page No: 100-110
DOI:19.18001.AJCT.2019.V12I7.19.10012
14. Optimization of MRR and Ra Using Multiple Regression and Artificial Neural Network (ANN) Methods
D.Sridevi, Ch.Maheswara Rao, B.Nagaraju – ANITS, Vsp, A.P., India.
Page No: 111-118
DOI:19.18001.AJCT.2019.V12I7.19.10013
15. A Review on various feature extraction techniques for Brain Tumor Detection and Classification
Preeti Arora, Dr. Rajeev Rattan – MVN University Palwal, Haryana, India.
Page No: 119-130
DOI:19.18001.AJCT.2019.V12I7.19.10014
16. TRANSIENT THERMAL ANALYSIS ON GAS TURBINE ROTOR BLADE BY USING FEA
MANJUNATH, Dr.T.P.BHARATHESH, Mr.PRAVEEN.D.N. – Akshaya institute of technology, Tumakuru, Karnataka, India.
Page No: 131-144
DOI:19.18001.AJCT.2019.V12I7.19.10015
17. Empirical Study on Innovative Techniques of Motivation for Employee Retention: Comparative Study of Jet Airways and Indigo Airlines at
Lucknow
Neha Nazneen Siddiqui, Gaurav Bisaria – Integral University, Kursi Road, Lucknow, Uttar Pradesh, India.
Page No: 145-156
DOI:19.18001.AJCT.2019.V12I7.19.10016
18. Integration of Supply Chain Management in Import Oriented Industries and inherent problem and probable solutions
Ankur Saran, Bineet Sinha – MVN University, Palwal, Haryana, India
Page No: 157-165
DOI:19.18001.AJCT.2019.V12I7.19.10017
19. A Survey on Protocols for Co-operative Communication
Prerna Agrawal, Hardesh Kumar – Shree Digamber Institue of Technology, Dausa
Page No: 166-170
DOI:19.18001.AJCT.2019.V12I7.19.10018
20. CONTROLLING DIRECTIONS OF AN AUTOMATED CAR BASED ON IOT
Aisha khatoon , Zeenath – Nawab Shah Alam Khan College of Engineering and Technology, New Malakpet, Hyderabad, Telangana, India.
Page No: 171-175a
DOI:19.18001.AJCT.2019.V12I7.19.10019
21. A Design of Dynamic Voltage Restorer (DVR) With Battery Energy Storage System
Dr. P.Vasudeva Naidu*, P.Anil Kumar**, GVSSNS Sarma***, Tejaswi*, Nikitha**
Matrusri Engineering College, Hyderabad, Telangana, India.
Page No: 176-183
DOI:19.18001.AJCT.2019.V12I7.19.10020
22. MARKETING OF COLLEGE FEMALE STUDENTS BUYING BEHAVIOUR TOWARDS COSMETICS PRODUCTS
Dr.T.MALATHI, R.SANGEETHA
Poompuhar College (Autonomous), Melaiyur-609 107, Nagapattinam district, Tamilnadu.
Page No: 184-189
DOI:19.18001.AJCT.2019.V12I7.19.10021
23. DOMESTIC VIOLENCE AGAINST WOMEN IN INDIA: AN EMPIRICAL STUDY ON THE EXISTING SOCIO- LEGAL FRAMEWORK WITH SPECIAL REFERENCE TO JALANDHAR AND HOSHIARPUR IN THE STATE OF PUNJAB
Dr. Arshi Pal Kaur – Guru Nanak Dev University, Regional Campus, Gurdaspur
Page No: 190-205
DOI:19.18001.AJCT.2019.V12I7.19.10022
24. Fabrication and Mechanical Properties Evaluation of Banana and Coir Fiber Reinforced Green Composites
Vishal J. Pandya, Pravin P. Rathod
Shantilal Shah Engineering College, Bhavnagar Gujarat Technological University, Gujarat.
Page No: 206-215
DOI:19.18001.AJCT.2019.V12I7.19.10023
25. A NOVEL APPROACH OF A-LAW AND MU-LAW COMPANDING FOR PAPR REDUCTION OF FBMC-OQAM SYSTEM
Puvvada Naga Venkata Durga Prasad, Gudivaka Mahesh – Bhimavaram Institute Of Engineering And Technology, Pennada, West Godavari,
Andhra Pradesh, INDIA
Page No: 216-222
DOI:19.18001.AJCT.2019.V12I7.19.10024
26. DEVELOPMENT OF DOOR ACCESSING SYSTEM USING DIGITAL IMAGE PROCESSING
D.Akhila , G.Sreenivasa Rao – Vidya Jyothi Institute of Engineering and Technology, Aziznagar, Moinabad, Rangareddy, Telangana, India.
Page No: 223-226
DOI:19.18001.AJCT.2019.V12I7.19.10025
27. School Culture and School Climate: Who is impacting whom?
Vandana Singh, Anubhuti Dubey – Deen Dayal Upadhyaya Gorakhpur University, Gorakhpur (U.P.), India.
Page No: 227-237
DOI:19.18001.AJCT.2019.V12I7.19.10026
28. TRANSIENT THERMAL ANALYSIS ON GAS TURBINE ROTOR BLADE BY USING FEA
MANJUNATH, Mr.PRAVEEN.D.N., Mr.LOHITESH JAGA KUMAR, Dr.T.P.BHARATHESH – Akshaya institute of technology, Tumakuru, Kamataka, India
Page No: 238-252
DOI:19.18001.AJCT.2019.V12I7.19.10027
29. BER PERFORMANCE METRIC OF MIMO-STBC-OFDM GADGET WITH M-QAM MODULATION THE USAGE OF ERROR CONTROL CODES
FOR MORE RELIABILITY
I. Pradeep Kumar, Mr. Bala Thimmaiah – Vasavi College of Engineering, Ibrahimbagh, Hyderabad, Telangana, INDIA
Page No: 253-259
DOI:19.18001.AJCT.2019.V12I7.19.10028
30. An overview of trade union and its cultivation in West Bengal
Sudipta Adhikary a, Dr. Rita Biswas b – Brainware University,Kolkata, West bengal, India.
Page No: 260-266
DOI:19.18001.AJCT.2019.V12I7.19.10029
31. Android Application Framework and the Working Principal of Android Applications
1Goskula Jayachandra 2Dr. K Suresh Babu – JNTUH, kukatpally, Hyderabad.
Page No: 267-272
DOI:19.18001.AJCT.2019.V12I7.19.10030
32. Small Tea Cultivation: A Case of West Bengal in India Arpita Dey
Alumnae – Vidyasagar University, Midnapore, West Bengal, India.
Nirmal Chandra Roy – The University of Burdwan, West Bengal, India.
Page No: 273-278
DOI:19.18001.AJCT.2019.V12I7.19.10031
33. ENERGY MONITORING AND CONTROL USING INTERNET OF THINGS (IOT) SYSTEM
GADILA SWATHI 1, RAKESH DASARI 2 – Dhulipalla, Sattenapalli, Guntur, Andhra Pradesh, India.
Nirmal Chandra Roy – The University of Burdwan, West Bengal, India.
Page No: 279-283
DOI:19.18001.AJCT.2019.V12I7.19.10032
34. Perception of women’s customers’ satisfaction towards branded herbal cosmetic products in Hyderabad city.
Ismailamiya 1* and Dr.P.Ashok Kumar 2 – AVS Arts & Science College Salem, 2 Sri Vasavi College, Erode. (Tamilnadu)
Page No: 284-293
DOI:19.18001.AJCT.2019.V12I7.19.10033
35. An Analysis of Gross Enrolment Ratio in Different Stages of Education in India.
Dr.S.Palani – Mannar Thirumalai Naicker College, Madurai.
P.Kohila – Arumugam Pillai Seethai Ammal College, Thiruppathur
Page No: 294-300
DOI:19.18001.AJCT.2019.V12I7.19.10034
36. A STUDY OF THE EFFECT OF BRANDING ON CONSUMER BUYING BEHAVIOR WITH RESPECT TO BRANDS IN FASHION INDUSTRY”
Dr. Nehaa Tripathi – SAGE University Indore, Trisha Shukla – Mayo College Girls School, Ajmer
Page No: 301-311
DOI:19.18001.AJCT.2019.V12I7.19.10035
37. ASSESSMENT OF SERVICE QUALITY ON CUSTOMER SATISFACTION IN FIVE STAR HOTELS IN CHENNAI CITY
S.Sekar, Dr.B.Sudha – niversity College of Arts and Science, Pappireddipatti, Dharmapuri-Dt, Tamilnadu
Page No: 312-321
DOI:19.18001.AJCT.2019.V12I7.19.10036
38. A STUDY ON MOTIVATION, BUSINESS PRACTICE AND PROBLEMS OF MICRO ENTREPRENEURS – SPECIFIC FOCUS ON STREET VENDORS
DR.P.ANBUOLI – MANNAR THIRUMALAI NAICKER COLLEGE, PASUMALAI, MADURAI, TAMILNADU.
Page No: 322-330
DOI:19.18001.AJCT.2019.V12I7.19.10037
39. IMPACT OF E-BANKING ON CUSTOMER SATISFACTION – A STUDY WITH REFERENCE TO COMMERCIAL BANKS
Sandhya.S, Dr. T. Srinivasan, Dr. S. Muralidhar – Annamalai University, Annamalai Nagar, Government First Grade College, Kolar District, Karnataka
Page No: 331-343
DOI:19.18001.AJCT.2019.V12I7.19.10038
40. Labour Welfare Practice and Ownership Pattern of Tea Plantations in West Bengal, India
Nirmal Chandra Roy, Dr. Debasish Biswas – The University of Burdwan, West Bengal, India, Vidyasagar University, West Bengal, India
Page No: 344-350
DOI:19.18001.AJCT.2019.V12I7.19.10039
41. FACTORS INFLUENCING CARDAMOM PLANTERS TO START PLANTATION IN KERALA
B.Sudha and R.Ramprabu – Periyar Constituent College of Arts and Science, Pappireddipatti.
Page No: 351-363
DOI:19.18001.AJCT.2019.V12I7.19.10040
42. PERFORMANCE OF INDIAN CARDAMOM INDUSTRY – AN ANLAYSIS
B.Sudha and R.Ramprabu – Periyar Constituent College of Arts and Science, Pappireddipatti.
Page No: 364-379
DOI:19.18001.AJCT.2019.V12I7.19.10041
43. THE EFFECT OF SERVICE QUALITY ON CUSTOMER SATISFACTION TOWARDS STAR HOTELS IN TAMILNADU
S.SEKAR, DR.B.SUDHA – PERIYAR UNIVERSITY CONSTITUENT COLLEGE OF ARTS AND SCIENCE PAPPIREDDIPATTI,
DHARMAPURI (DISTRICT) (TAMILNADU, INDIA)
Page No: 380-392
DOI:19.18001.AJCT.2019.V12I7.19.10042
44. “ROLE OF ORGANIZATIONAL CLIMATE AND JOB PERFORMANCE IN HOSPITAL”
Dr. S. Sivaraj Murugan – Annamalai University
Page No: 393-401
DOI:19.18001.AJCT.2019.V12I7.19.10043
45. Handling the Relay Transmission Problem from the Perspective of Game Models
M.Saritha, N.Vijay Kumar – Loyola Institute of Technology and Management, Sattenapalli, Guntur.
Page No: 402-408
DOI:19.18001.AJCT.2019.V12I7.19.10044
46. BLENDED LEARNING APPROACH: OPTIMIZING LEARNING AND EMPLOYABILITY OF STUDENTS OF TECHNICAL INSTITUTIONS
Dr. PUSULURI SREEHARI – Malla Reddy Engineering College (Autonomous), Hyderabad
Page No: 409-414
DOI:19.18001.AJCT.2019.V12I7.19.10045
47. COMPREHENSIVE REVIEW ON USE OF CANAL CONCRETE LINING EXAMINING FUNDAMENTAL PROBLEMS IN IRRIGATION SYSTEM
G.MADAN MOHAN REDDY – Mallareddy Institute of Technology, Maisammaguda, Dhullapally, Post Via Kompally, Secunderabad, Teangana. India.
Page No: 415-421
DOI:19.18001.AJCT.2019.V12I7.19.10046
48. A study on Gamification and its effect in changing rules of compensation system
Archita Banerjee, Dr Shantanu Mazumder – Maulana Abul Kalam Azad University of Technology,Kolkata,West Bengal,India, IMS Business School
Page No: 422-425
DOI:19.18001.AJCT.2019.V12I7.19.10047
49. NEURO –ECONOMIC ‘AGENT’ IN BUSINESSTRANSFORMATION
Colonel (Dr.) Jyotirmaya Satpathy, Prof (Dr) Julie S. Banerji – National Defence Academy, Pune (India), International School of
Management (ISM), Patna, Bihar, (India)
Page No: 426-442
DOI:19.18001.AJCT.2019.V12I7.19.10048
50. CHANGES IN FINANCIAL PERFORMANCE OF TRADITIONAL INTERMEDIATRIES FOR FINANCIAL INNOVATION
RAJNISH KLER – MOTILAL NEHRU COLLEGE (EVENING), UNIVERSITY OF DELHI , NEW DELHI
Page No: 443-453
DOI:19.18001.AJCT.2019.V12I7.19.10049
51. EXPLORATIONS IN MANAGERIAL LENDING BEHAVIOUR
Colonel (Dr.) Jyotirmaya Satpathy, Professor (Dr) D P Mishra – National Defence Academy, Pune, Fakir Mohan University (India).
Page No: 454-461
DOI:19.18001.AJCT.2019.V12I7.19.10050
52. INDIAN PERSPECTIVE ON DIVIDEND POLICY AND SHARE PRICE VOLATILITY
ARSHID AHMAD BHAT, FAYAZ AHMAD NIKA – CENTRAL UNIVERSITY OF KASHMIR
Page No: 462-472
DOI:19.18001.AJCT.2019.V12I7.19.10051
53. SELF-ESTEEM OF SUBSTANCE ABUED CHILDREN IN VIJAYAPURA CITY
Praveenkumar, Gangadhar B Sonar – Rani Channamma University, Belagavi., Karnataka State Akkamahadevi Women’s University, Vijayapura.
Page No: 473-481
DOI:19.18001.AJCT.2019.V12I7.19.10052
54. EFFECT OF IRREGULARITY SHAPE ON FLAT SLAB MULTISTOREY BUILDING UNDER LATERAL LOADING USING ETABS
Khaja Ateequddin1, waseemsohail2 – Lords institute of engineering & technology, Himayathsagar, Hyderabad, Telangana, India.
Page No : 483-491
DOI:19.18001.AJCT.2019.V12I7.19.10053
55. A STUDY ON JOB SATISFACTION OF EMPLOYEES IN CO-OPERATIVE SUGAR MILLS IN TAMILNADU
Dr.V.Pasupathi, S.Sakthivel – Periyar University College of Arts and Science, Pappireddipatti, Dharmapuri(Dt), Tamilnadu
Page No : 492-499
DOI:19.18001.AJCT.2019.V12I7.19.10054
56. BORROWING WORDS IN INDIA TODAY NEWS HEADLINES
Dr. P. Sarath Chandra, Assistant professor – Maulana Azad National Urdu University, Hyderabad.
Page No : 500-506
DOI:19.18001.AJCT.2019.V12I7.19.10055
57. Investigation Occupational Hand Arm vibration exposure among drop forging workers
Kamaljeet Bhambri, Ishbir Singh, Harwinder Singh, Tejeet Singh – IKGPTU, Jalandhar, Punjab, India, Chandigarh University, Ghuran, Punjab,
India, GNDEC, Ludhiana, Punjab, India, SBSSTC, Ferozepur, Punjab, India.
Page No : 507-512
DOI:19.18001.AJCT.2019.V12I7.19.10056
58. Discomfort for Drop forging subjects by Vertical Whole body Vibration
Kamaljeet Bhambri, Ishbir Singh, Harwinder Singh, Tejeet Singh – IKGPTU, Jalandhar, Punjab, India, Chandigarh University, Ghuran, Punjab,
India, GNDEC, Ludhiana, Punjab, India, SBSSTC, Ferozepur, Punjab, India.
Page No : 513-517
DOI:19.18001.AJCT.2019.V12I7.19.10057
59. Investigating Barriers to Energy Efficiency in Steel Rolling Industries of Mandi Gobindgarh
Anil Kumar, Vijay Kumar, Balkar Singh – IKGU, Jalandhar, Punjab, Chitkara University, Chandigarh, IKGU, Jalandhar
Page No : 518-528
DOI:19.18001.AJCT.2019.V12I7.19.10058
60. Effect of Jet Velocity and Angle of Impact on Slurry Erosion Rate of Steels and Super alloys
Jasbir Singh, Amrinder Pal Singh – Desh Bhagat University, Mandi Gobindgarh, Punjab, University Institute of Engineering and Technology,
Panjab University, Chandigarh, India
Page No : 529-536
DOI:19.18001.AJCT.2019.V12I7.19.10059
61. CFD analysis of heat transfer performance of a car radiator using nanofluid
Gaurav Gautam, Anjali Gupta, Rajesh Kumar – PEC , Chandigarh, UIET, Panjab University Chandigarh
Page No : 537-545
DOI:19.18001.AJCT.2019.V12I7.19.10060
62. A review on controllable parameters of metal matrix composite development and their optimization
Harinder Singh, Amandeep Singh Wadhwa, Amit Chauhan – University Institute of Engineering and Technology, Sector-25, Panjab University,
Chandigarh, India
Page No : 546-556
DOI:19.18001.AJCT.2019.V12I7.19.10061
63. A State of Art on Hybrid approaches of Abrasive Flow Machining with their applications Using Abrasive Particulates
Vipin Kumar Sharma, Vinod Kumar, Ravinder Singh Joshi – Thapar University Patiala, Punjab India
Page No : 557-564
DOI:19.18001.AJCT.2019.V12I7.19.10062
64. Optimization of Rotary EDM Process Parameters for Machining of Monel 400 Alloy
Naveen Chaubey, Partap Singh Samra – Sri Guru Granth Sahib World University, Fatehgarh Sahib, Punjab, India.
Page No : 565-570
DOI:19.18001.AJCT.2019.V12I7.19.10063
65. Applicability for Determination of Color Sorting Machine in Industry
Rahul Dhiman, Manmeet Singh, Munish, Gurpreet S. Malhi, Dr. Jaswanti – Chandigarh Engineering College Chandigarh Group of Colleges
Campus, Landran, Punjab. India
Page No : 571-576
DOI:19.18001.AJCT.2019.V12I7.19.10064
66. Design, Modelling and Shear analysis of micro-sized piezoelectric quartz crystal for oscillators and mircobalances
Sumeet Goyal, Rahul Kakkar, Sohni Singh, Joginder Singh, Harjinder Singh – CGC College of Engineering Landran, Punjabi University, Patiala
Page No : 577-586
DOI:19.18001.AJCT.2019.V12I7.19.10065
67. Optimization of Process Parameters during Minimum Quantity Lubrication Assisted Turning of Biocompatible Ti-6Al-7Nb alloy
Anuj Sharma, Anjali Gupta, Rajesh Kumar – UIET, Panjab University, Chandigarh, India
Page No : 587-592
DOI:19.18001.AJCT.2019.V12I7.19.10066
68. Powder mixed EDM: A surface modification method for metallic biomaterials
Gaurav Kumar Sharma – Punjab Engineering College, Chandigarh, India
Page No : 593-598
DOI:19.18001.AJCT.2019.V12I7.19.10067
69. Design Process: Past, Present and Future
Sukhwinder S. Chahal, Kristian T. Bailey, Rachin Goyal, Vinod Kumar Rohilla – MIE, Australia, CAD Designer, Downer EDI Ltd, Maryborough,
Australia, Chandigarh Engineering College, Landarn, Punjab, India
Page No : 599-604
DOI:19.18001.AJCT.2019.V12I7.19.10068
70. Robust based PSS using ACO for Small Signal Stability
Monika, Balwinder Singh, Rintu Khanna – PEC (Deemed to be University), Chandigarh
Page No : 605-614
DOI:19.18001.AJCT.2019.V12I7.19.10069
71. Analysis of PMEDM Parameters Involved In Machining Process of Inconel-800 Material through Taguchi Methodology
Er. Ashwani Sharma, Kamal Kumar Gautam, Vivek Singh, Rachit Singh, Lokender Verma – Green Hills Engineering College, Kumarhatti,
solan (HP) India
Page No : 615-620
DOI:19.18001.AJCT.2019.V12I7.19.10070
72. Barriers to Energy Efficiency in Mohali Manufacturing Cluster
Anil Kumar – Indo Global Engineering College, Mohali, Punjab, India
Page No : 621-626
DOI:19.18001.AJCT.2019.V12I7.19.10071
73. Recent Developments and Comprehensive Review on Water Cooling Techniques for PV Panels
Ashish Dhull, Munish Gupta, Puneet Katyal, Himanshu Manchanda, Mahesh Kumar – Guru Jambheshwar University of Science and Technology, Hisar
Page No : 627-632
DOI:19.18001.AJCT.2019.V12I7.19.10072
74. A review on synthesis and heat transfer applications of carbon nanotubes nanofluid
Neeti Arora, Munish Gupta – Guru Jambheshwar University of Science and Technology, Hisar, Haryana, India
Page No : 633-640
DOI:19.18001.AJCT.2019.V12I7.19.10073
75. TO EVALUATE THE IMPORTANCE OF SIX SIGMA IN TELECOMMUNICATION INDUSTRY
Ramanjeet Singh, Balvinder Singh – Adesh Institute of Engineering and Technology, Gharuan, Punjab, India
Page No : 641-644
DOI:19.18001.AJCT.2019.V12I7.19.10074
76. Lean Six Sigma: A Literature Review
Narender Kumar, S. K. Jarial, M. S. Narwal – Deenbandhu Chhotu Ram University of Science& Technology Murthal, Sonepat (India)
Page No : 645-668
DOI:19.18001.AJCT.2019.V12I7.19.10075
77. Customised Daylight System with Light Collimator
Guramandeep Singh, Jaswinder Singh Mehta, Dr. Harry Garg, Karanvir Sharma – Panjab University, Chandigarh, CSIR-CSIO Chandigarh
Page No : 669-678
DOI:19.18001.AJCT.2019.V12I7.19.10076
78. Performance Analysis Comparison of AISI-202 and AISI-304 Stainless Steels Using Taguchi Methodology
Kamal Kumar Gautam – Green Hills Engineering College, Solan, India
Page No : 679-685
DOI:19.18001.AJCT.2019.V12I7.19.10077
79. Review on process parameters of WEDM
Shubham Sharma, Er. Ashwani Sharma – Green Hills Engineering College Kumarhatti solan (HP) India
Page No : 686-692
DOI:19.18001.AJCT.2019.V12I7.19.10078
80. Transmission System in Automobiles:A Review
Anand Sharma, EmailParveen Goyal – UIET, Panjab University, Chandigarh, India
Page No : 693-697
DOI:19.18001.AJCT.2019.V12I7.19.10079
81. Prioritization of Critical Success Factors using Fuzzy and Fuzzy TOPSIS for successful implementation of Lean and Six-Sigma in
Process Industry
Mahesh kumar, Dr. M.S Narwal, Jaswant singh and Aladeen Khan – DCRUST Murthal Sonipat
Page No : 698-706
DOI:19.18001.AJCT.2019.V12I7.19.10080
82. Taguchi based optimization-machining parameters during machining of Berliyium Copper alloys for better surface finish
Rajesh Kumar, Ram Narayan, Amresh Kumar, Rajdeep Singh – SDDIET, KU University,Panchkula, Harayana, CEC Landran, Mohali, India,
Chandigarh Engineering College, Landran, India
Page No : 707-712
DOI:19.18001.AJCT.2019.V12I7.19.10081
83. Role of Supply Chain Management in Northern Indian Industries
Simranjit Singh Sidhu, Tavinder Pal Singh, Rupinder Singh – Punjabi University, Patiala
Page No : 713-720
DOI:19.18001.AJCT.2019.V12I7.19.10082
84. Analytical Prediction of Stability Lobes in Drilling in Bending Including Gyroscopic Effect
Jitender Kapoor, Archana Thakur – National Institute of Technology Karnataka, CGC Landran
Page No : 721-729
DOI:19.18001.AJCT.2019.V12I7.19.10083
85. Effect of sliding velocity on wear behaviour and coefficient of friction of walnut shell powder/polyester composites
Mukesh Kumar, Vishal Ahlawat, Vishal Sharma, Manish Kumar, Manjit Singh – U.I.E.T., Maharshi Dayanand University, Rohtak (India),
Chandigarh Engineering College, Landran, Mohali
Page No : 730-739
DOI:19.18001.AJCT.2019.V12I7.19.10084
86. Comparative Study with and without the Effect of Powder Mixed Dielectric on Performance Measures in EDM
Dr. Satish Kumar, Dr. Sanjeev Kumar, Dr. Virender Chahal – Chandigarh Engineering College, Landran, Punjab, India
Page No : 740-749
DOI:19.18001.AJCT.2019.V12I7.19.10085
87. Effect of Varying Surface Grinding Parameters on the Surface Roughness of Die Steel
Aishna Mahajan, Satish Kumar – Chandigarh Engineering College, Landran (Mohali), Punjab, India
Page No : 750-756
DOI:19.18001.AJCT.2019.V12I7.19.10086
88. Selection of Most Critical Industrial Wastes: A Literature Study
Dr. Virender Chahal and Dr. Sanjeev Sharma and Dr. Satish Kumar – Chandigarh Collage of Engineering, Landran, Mohali, Punjab, India
Page No : 757-762
DOI:19.18001.AJCT.2019.V12I7.19.10087
89. Fabrication and Characterization of Hybrid GFRP
Rahul Mehra, Sachin Mohal, B. Lonia – IK Gujral Punjab Technical University, Kapurthala, Punjab, India, CEC, Landran, Punjab, India,
Uttaranchal University, Dehradun, India
Page No : 763-770
DOI:19.18001.AJCT.2019.V12I7.19.10088
90. Investigations on Machining Characteristics of Ti-6Al-4V Titanium Alloys using EDM
Sanjeev Kumar, Satish Kumar, Virender Chahal – Chandigarh Engineering College, Landran
Page No : 771-776
DOI:19.18001.AJCT.2019.V12I7.19.10089
91. Single and Sequential Double Sided Friction Stir Welding of Aluminum Alloy AA 1100
Dr. Vinod Kumar Rohilla, Dr. Rachin Goyal, Amresh Kumar, Dr. Sachin Mohal – Chandigarh Engineering College, Landran , Mohali, (Pb.)
Page No : 778-784
DOI:19.18001.AJCT.2019.V12I7.19.10090
92. Investigation of mechanical properties of Al6061/Al2O3-SiC composites fabricated by stir casting
Sachin Mohal, Ashish Sharma, Rajesh Sharma, Vinod Kumar Rohilla, Rachin goyal – CEC, Landran, Punjab, India
Page No : 785-791
DOI:19.18001.AJCT.2019.V12I7.19.10091
93. Optimization of parameters during turning of EN 24 steel with Minimum Quantity Lubrication
Archana Thakur, Alakesh Manna, Sushant Samir – Punjab engineering college (Deemed to be university) Chandigarh, India
Page No : 792-800
DOI:19.18001.AJCT.2019.V12I7.19.10092
94. Experimental study on hot die steel tool HS21 using coated and uncoated brass wire on WEDM
Harvinder Singh Rattan, Rajdeep Singh, Rajender Singh, Puneet Katyal, Akash – Chandigarh Group of Colleges, Landran, Guru Jambheshwar
University of Science and Technology, Hisar
Page No : 801-816
DOI:19.18001.AJCT.2019.V12I7.19.10093
95. Selection of Range of Peak Current during Cryogenically Assisted Electric Discharge Machining
Rachin Goyal, Vinod Kumar Rohilla, Amresh Kumar, Sachin mohal – Chandigarh Engineering College, Landarn, Punjab, India
Page No : 817-821
DOI:19.18001.AJCT.2019.V12I7.19.10094
96. An experimental investigation of solar air collector with plain and corrugated absorber plate
Suman Debnath, Pradeep Bishnoi – Chandigarh Engineering College
Page No : 822-829
DOI:19.18001.AJCT.2019.V12I7.19.10095
97. Experimental optimization of Gas Flow Rate and Current Intensity for TIG Welding of Aluminium Alloy- 2014
Ramandeep Singh, Sukhjinder Singh, Vikas Kaushik – Chandigarh Engineering College, Landran, Punjab, India
Page No : 830-836
DOI:19.18001.AJCT.2019.V12I7.19.10096
98. Experimental Investigation of Solar Still with Heat Storage Materials
Vikrant, Gurkirat Singh – CGC Landran
Page No : 837-847
DOI:19.18001.AJCT.2019.V12I7.19.10097
99. Investigation of Micro Hardness and Microstructure of Microwave Welded Joint on EN-08
Gurkirat Singh, Gurpreet Singh Malhi, Taljeet Singh – CEC, Landran ,Punjab ,India
Page No : 848-851
DOI:19.18001.AJCT.2019.V12I7.19.10098
100. An Experimental Investigation on Tribological Performance of Graphite Grease
Prabhat Kumar, Rakesh Kumar, Santosh Kumar – Chandigarh Group of Colleges, Landran, Mohali, Punjab, India.
Page No : 853-859
DOI:19.18001.AJCT.2019.V12I7.19.10099
101. Frictions Stir Process Tool for Surface Modification of Different Alloy: A Review
RakeshKumar, Prabhat Kumar, Prabhat Kumar – Chandigarh University, Gharuan, Mohali, Punjab, India.
Page No : 860-868
DOI:19.18001.AJCT.2019.V12I7.19.10100
102. Effect of cryogenic treatment on tool steel and machining parameters: A review
Aneesh Goyal, Dr. Sushil Mittal, Rajdeep Singh, Harvinder Singh, Jeewan Singh – Chandigarh Group of Colleges, Landran, India, Chandigarh
University, Gharuan, India
Page No : 869-874
DOI:19.18001.AJCT.2019.V12I7.19.10101
103. A Scientific Approach on Thermally Induced Vibrations of Nonhomogeneous Tapered Rectangular Plate
Pooja Singhal, Ruby – Chandigarh Engineering College, Landran, Mohali, Punjab, India, BB Panjab university Constituent College, Balachaur,
Punjab, India
Page No : 875-882
DOI:19.18001.AJCT.2019.V12I7.19.10102
104. Calcium Chloride Based Liquid Desiccant Dehumidification System-An Influence of Packing Height
Satwinder Singh, Swarn Singh – Chandigarh Group of Colleges, Landran (Mohali), Punjab, India
Page No : 884-891
DOI:19.18001.AJCT.2019.V12I7.19.10103
105. Increasing the Efficiency of CNC Turning Machine
Priyaansh Parsad, Varun Arora – Chandigarh Engineering College, Landran Punjab Technical University
Page No : 892-899
DOI:19.18001.AJCT.2019.V12I7.19.10104
106. Overview of Wire Arc Spray Process: A Review
Santosh Kumar, Amit Handa, RakeshKumar – IKG Punjab Technical University, Kapurthala, Punjab, India., Chandigarh Group of Colleges,
Landran, Mohali, Punjab, India
Page No : 900-907
DOI:19.18001.AJCT.2019.V12I7.19.10105
107. Thermal and Mechanical Fatigue Loading Analysis of Exhaust Manifold
Sandeep Singh Sangwan, Sachin Mohal, Arvind Kumar – Chandigarh Engineering College, Landran, Mohali (Punjab)
Page No : 908-912
DOI:19.18001.AJCT.2019.V12I7.19.10106
108. EFFECT OF COPPER AND SILICON ADDITION ON TENSILE STRENGTH OF AUSTEMPRED DUCTILE IRON
Vikas Kaushik, Sukhjinder Singh, Ramandeep Singh – Chandigarh Engineering College, Landran, Punjab, India
Page No : 913-917
DOI:19.18001.AJCT.2019.V12I7.19.10107
109. Investigation of Micro Hardness and Microstructure of Microwave Welded Joint on EN-08
Gurkirat Singh, Gurpreet Singh Malhi, Taljeet Singh – CEC, Landran ,Punjab ,India
Page No : 918-923
DOI:19.18001.AJCT.2019.V12I7.19.10108
110. Modeling and Analysis of Electro statically Actuated Polysilicon Cantilever MEMS Device
Swarn Singh, Manvinder Sharma, Satwinder Singh, Virat Khanna, Dishant Khosla – CGC College of Engineering, Landran, (Mohali), Punjab,
India. Maharaja Agrasen University, Baddi, Himachal Pradesh, India
Page No : 924-930
DOI:19.18001.AJCT.2019.V12I7.19.10109
111. CREEP BEHAVIOUR OF A FUNCTIONALY GRADED ROTATING DISC WITH CONSTANT THICKNESS: A REVIEW
Rupinder Singh, TavinderPal Singh – Chandigarh Engineering College, Landran, Mohali, Punjab, India
Page No : 931-942
DOI:19.18001.AJCT.2019.V12I7.19.10110
112. A Study of SS Cladding with SAW process by changing welding parameters
Avtar Singh, Taljeet Singh, Gurpreet Singh – Chandigarh Engineering College, Landran, Mohali, INDIA
Page No : 943-950
DOI:19.18001.AJCT.2019.V12I7.19.10111
113. Analysis of Rotavator Blades for its Enhanced Performance Against Abrasive Wear Using Hard Facing
Gagandeep Singh, Farman Khan, Ravinder Singh – CEC, Landran, Mohali, India
Page No : 951-958
DOI:19.18001.AJCT.2019.V12I7.19.10112
114. Effects of Multipass FSW on Mechanical and Metallurgical Properties of Aluminium 6061 Alloy
Ravinder Singh, Farman Khan, Gagandeep Singh – CEC, Landran, Mohali, India
Page No : 959-965
DOI:19.18001.AJCT.2019.V12I7.19.10113
115. Design OptimizationofAISI 8620 Alloy Steel Tie Rod With Using CAD/CAE Tools
Farman Khan, Sangram Singh thakur, Gagandeep SinghSandhu, Ravinder Singh – CEC, Landran, Mohali, India
Page No : 966-972
DOI:19.18001.AJCT.2019.V12I7.19.10114
116. Design and Fabrication of Prosthetic Leg
Harsimran Jeet Singh Sidhu, Santosh Kumar – Chandigarh Group of Colleges, Landran, Mohali, Punjab, India., IKG Punjab Technical
University,Kapurthala, Punab, India.
Page No : 973-981
DOI:19.18001.AJCT.2019.V12I7.19.10115
117. Process parameters optimization of Wire-cut Electric Discharge Machining: A Review
Pawan Nain, Arvind, Mohit Kumar Mishra, Mohd Jafar, Mrityunjaya Vashishtha, NamanGoyal – Chandigarh Engineering College, Landran,
Punjab, India
Page No : 982-996
DOI:19.18001.AJCT.2019.V12I7.19.10116
118. Comparative analysis between UPWIND and QUICK finite difference approach considering thermal diffusion
Dr. Manjit Singh, Dr. Chanpreet Singh, Dr. D. Gangacharyulu – Chandigarh Engineering College, Landra, Mohali, Punjab, India, Thapar Institute
of Engineering & Technology, Patiala, Punjab, India
Page No : 997-999
DOI:19.18001.AJCT.2019.V12I7.19.10117
119. Review of supply chain management in manufacturing organizations
Tavinder Pal Singh, Simranjit Singh Sidhu – CGC, landran, Punjab,India, Punjabi University,Patiala, Punjab,India
Page No : 1000-1007
DOI:19.18001.AJCT.2019.V12I7.19.10118
120. Investigation of Kerf quality of Inconel material machined by Abrasive water jet
Arvind Kumar, Pawan Kumar, Sandeep Sanghwan
Page No : 1008-1015
DOI:19.18001.AJCT.2019.V12I7.19.10119
121. A review of effects of Technology-push and Demand-pull strategies on Sustainable development in manufacturing industries
Dr. Anuj Singla, Dr. Arti Tyagi, Ms. Kiran Kaundal, Ms. Sapna – Chandigarh Engineering College, Landran, Mohali, Punjab, India
Page No : 1016-1021
DOI:19.18001.AJCT.2019.V12I7.19.10120
122. Achieving higher cutting speed in machining of Be-Cu alloy using Taguchi parameter design approach
Amresh Kumar, Amrinder Singh, Major Singh – CEC Landran, Mohali, Punjab
Page No : 1022-1027
DOI:19.18001.AJCT.2019.V12I7.19.10121
123. AN EXPERIMENTAL INVESTIGATION ON STUDY OF FLUID FLOW AND HEAT TRANSFER WITHIN A MICROTUBE
Randeep Singh, Rajesh Sharma, Rajdeep Singh, Mukesh Kumar – CEC Landran, Mohali
Page No : 1028-1035
DOI:19.18001.AJCT.2019.V12I7.19.10122
124. Electrical Discharge Machining (EDM): A Review
Ajay Sharma, Nikhil – Chandigarh Engineering college , Landran (Mohali)
Page No : 1036-1041
DOI:19.18001.AJCT.2019.V12I7.19.10123
125. Preparation and characterization of biomaterial Hydroxyapatite
Ramandeep Singh Dhindsa – Chandigarh Engg. College, Landran, Mohali, Punjab, India
Page No : 1042-1050
DOI:19.18001.AJCT.2019.V12I7.19.10124
126. Experimental Analysis of Thermal Performance of a Solar Air Heater Having Thermal Mass (Metallic Chips)
Satish Kumar, Aishna Mahajan – Chandigarh Engineering College, Landran (Mohali), Punjab, India
Page No : 1051-1055
DOI:19.18001.AJCT.2019.V12I7.19.10125
127. Microstructure and Tensile Strength of Dissimilar Aluminium Alloys Butt Joints Welded With Friction Stir Welding Process
Jeewan Singh, Rajdeep Singh, Harvinder Singh, Aneesh Goyal – Chandigarh Engineering College, Landran, Punjab, India
Page No : 1056-1061
DOI:19.18001.AJCT.2019.V12I7.19.10126
128. A REVIEW PAPER OF RESISTANCE SPOT WELDING PARAMETER OF AUSTENITE STAINLESS STEEL (ASS) 316L
RavinderjeetSingh, D.S.Sahota – UCOE, Punjabi University Patiala, Punjab
Page No : 1062-1073
DOI:19.18001.AJCT.2019.V12I7.19.10127
129. Design and Simulation of Bike Frame Using SolidWorks and ANSYS
Durga Charan, Dr. Sanjeev Kumar Garg – Seth Jai Parkash Mukand Lal Institute of Engineering and Technology (JMIT) Radaur, Yamunanagar,
Haryana, India
Page No : 1074-1079
DOI:19.18001.AJCT.2019.V12I7.19.10128
130. Effect of process parameters on hardness in incremental sheet metal forming process
Narinder kumar, R.M.Belokar, Sanjeev Kumar Garg – Seth Jai Prakash Mukand Lal Instititue of Engineering and Technology ,Radaur,Haryana, India
Page No : 1080-1085
DOI:19.18001.AJCT.2019.V12I7.19.10129
131. A Comprehensive Review on Machining Characteristics of Various Process Parameters and their Responses Using Magnetically
Assisted Abrasive Flow Machining (MAAFM)
Gagandeep Chawla1, Dimple Kumar, Dr. Vinod Kuma Mittal, Dr. Surjit Angra, Dr. Sushil Mittal – National Institute of Technology, Kurukshetra,
Haryana, India, Chandigarh University, Gharuan, Mohali, Punjab, India
Page No : 1086-1092
DOI:19.18001.AJCT.2019.V12I7.19.10130
132. Application of Grey Relational analysis in Optimization of WEDM process –A case study
Jatinder Singh, Kulvinder Garg, Amresh Kumar – MIMIT Malout,Punjab, CEC Landran, Mohali, Punjab
Page No : 1093-1098
DOI:19.18001.AJCT.2019.V12I7.19.10131
133. Effect of Wire Feed Rate and Wire Tension on Machining Performance of Al/SiC composite
Jaspreet Singh, Suraj Rehan, Yakun Wang, Vikas Sharma – CGC college of Engineering Landran, Mohali, Punjab
Page No : 1099-1104
DOI:19.18001.AJCT.2019.V12I7.19.10132
134. IMPACT OF CAPITAL STRUCTURE ON PROFITABILITY OF AUTOMOBILE COMPANIES IN INDIA (WITH SPECIAL REFERENCE TO
TATA MOTORS LTD. AND MAHINDRA & MAHINDRA LTD.)
V.Sureshkumar – Government Arts College (Autonomous), Salem-7, Tamil Nadu
Page No: 1105-1114
DOI:19.18001.AJCT.2019.V12I7.19.10133
135. IMPACT OF WORKING CAPITAL ON PROFITABILITY OF AUTOMOBILE COMPANIES IN INDIA (WITH SPECIAL REFERENCE TO
TATA MOTORS LTD. AND MAHINDRA & MAHINDRA LTD)
V.Sureshkumar – Government Arts College (Autonomous), Salem-7, Tamil Nadu
Page No: 1115-1124
DOI:19.18001.AJCT.2019.V12I7.19.10134
136. FACILITATING LEARNER AUTONOMY IN WRITING THROUGH MULTIPLE INTELLIGENCES IN AN ESL CONTEXT- A CASE STUDY
Dr.G.Raja Shekhar – Dr.VS Krishna Govt. Degree College (A), Visakhapatnam.
Page No: 1125-1133
DOI:19.18001.AJCT.2019.V12I7.19.10135
137. AN EXPERIMENTAL AND DYNAMIC ANALYSIS OF NANO WIND TURBINE
K. MANIKANDAN, M. VAIRAVEL, N. SUNDARAMOORTHY, S. SARAVANAN – Tejatech Design solution Pvt ltd, Erode, TamilNadu.,
St Thomas College of Engineering and Technology, Chengannur, Kerala., Sembcorp Green Infra Ltd, Gurgaon.,
Muthayammal Engineering College, Rasipuram, Namakkal.
Page No: 1134-1140
DOI:19.18001.AJCT.2019.V12I7.19.10136
138. INVESTIGATIONS ON DUCTILITY BEHAVIOR OF HYBRID FIBRE REINFORCED CONCRETE SLABS
Dr.A.ANBUCHEZIAN – AnnaPoorana Engineering College , Sankari Main Road Periya Seeragapadi, Salem, Tamil Nadu.
Page No: 1141-1146
DOI:19.18001.AJCT.2019.V12I7.19.10137
139. PLANNING AND EMPIRICAL STUDY OF ECONOMICAL BIO-MASS HEATER
Selvaraj .M, S.Saravanan, S.VinothKumar, R.Girimurugan, C.Thiruvasagam – Gnanamani College Of Technology ,Namakkal , Tamil Nadu ,India.,
K.S.R College of Engineering- Tiruchengode, Tamil Nadu ,India., Nandha College of Technology, Perundurai, TamilNadu, India.
Page No: 1147-1155
DOI:19.18001.AJCT.2019.V12I7.19.10138
140. DEVELOPMENT AND ANALYSIS OF AN OVAL-SHAPED BIKE CHASSIS
S.Saravanan, S.VinothKumar, R.Girimurugan, C.Thiruvasagam, Selvaraj .M – Gnanamani College Of Technology ,Namakkal , Tamil Nadu ,India.,
K.S.R College of Engineering- Tiruchengode, Tamil Nadu ,India., Nandha College of Technology, Perundurai, TamilNadu, India.
Page No: 1156-1162
DOI:19.18001.AJCT.2019.V12I7.19.10139
141. NUMERICAL STUDIES ON THE CAVITY IN GAS OIL INJECTOR
M.Dineshkumar, R.Manivannan, Dr.R.Mohan, S.Kavitha, Dr.M.Vairavel – PACE Institute Of Technology And Sciences ,Ongole ,Andhra Pradesh , India.
AVS Engineering College, Salem ,Tamil Nadu ,India .
Sona College of Technology, Salem, Tamil Nadu ,India
Kalasalingam Academy of research and Education,Krishnankoil,Srivilliputtur, Tamilnadu, India.
Teja Tech and Design Solutions, Erode, Tamilnadu, India.
Page No: 1163-1176
DOI:19.18001.AJCT.2019.V12I7.19.10140
142. SELF- COMPACTING CONCRETE WITH HIGH LEVELS OF FLY ASH
Dr.V.Subramania Bharathi, Dr.K.Mohammed Imthathullah Khan, Nooreen Fatima – Lords Institute of Engineering and Technology, Hyderabad.
Page No: 1177-1182
DOI:19.18001.AJCT.2019.V12I7.19.10141
143. APPLICATIONS, CONFIDENTIALITY ANDENCRYPTION IN WLAN
MALYADRI KORIPI – Micro Services Lead Developer, MASTECH DIGITALat client PNC, PA
Page No: 1183-1187
DOI:19.18001.AJCT.2019.V12I7.19.10142