1. Grassroots Governance towards Transparency and Development
     Dr. Akhilesh Pal – Iswar Saran PG College University of Allahabad Prayagraj
     Page No: 1-19
     DOI:19.18001.AJCT.2019.V12I7.19.10000
 
2. Control and Analysis of Multilevel Invereters Using Different PWM Modulation Topologies
     Dr.K.Srinivas – JNTUH College of Engineering Jagityal, Jagityal, Telangana,India
     Page No: 20-24
     DOI:19.18001.AJCT.2019.V12I7.19.10001
 
3. Descriptive Analysis of Signature Identification and Verification System
     Navdeep Kaur – Chandigarh Engineering College, Landran, Punjab
     Page No: 25-29
     DOI:19.18001.AJCT.2019.V12I7.19.10002
 
4. PROMOTION OF ENTREPRENEURSHIP THROUGH EFFECTUATION PROCESS – ROLE OF INFORMAL FINANCE
     Mamatha S and Dr. Subramanyam Mutyala – REVA University, Bangalore.
     Page No: 30-38
     DOI:19.18001.AJCT.2019.V12I7.19.10003
 
5. A SURVEY ON HANDOVER ALGORITHMS IN HETEROGENOUS WIRELESS NETWORK
     Mr.Mithun B.Patil, Dr Rekha Patil – PDACE,Kalburagi Karanataka ,India
     Page No: 39-41
     DOI:19.18001.AJCT.2019.V12I7.19.10004
 
6. pH and Temperature Responsive potassium polyacrylate Hydrogel used in drug delivery
     Nitish Jha, Dr. Sameer Wagh, Dr. Pratibha Gupta – Laxminarayan Institute of Technology, RTM Nagpur University, Nagpur
     Page No: 42-50
     DOI:19.18001.AJCT.2019.V12I7.19.10005
 
7. Voltage Regulation of Distribution Grid Using DSTATCOM with PI and DQ Control Techniques
     Dr.K.Srinivas – JNTUH Jagityal,Karimnagar,India
     Page No: 51-56
     DOI:19.18001.AJCT.2019.V12I7.19.10006
 
8. A STUDY ON CDR SYSTEM IN INDIAN & CHINA ECONOMIES
     Dr.B.Saritha, Mrs. Seema Nazneen – MG University, Nalgonda., Osmania University
     Page No: 57-62
     DOI:19.18001.AJCT.2019.V12I7.19.10007
 
9. A Design of Dynamic Voltage Restorer (DVR) With Battery Energy Storage System
    Dr. P.Vasudeva Naidu, P.Anil Kumar, GVSSNS Sarma, Tejaswi, Nikitha – Matrusri Engineering College, Hyderabad, Telangana, India
     Page No: 63-70
     DOI:19.18001.AJCT.2019.V12I7.19.10008
 
10. PARALLEL IMPLEMENTATION OF IMAGE MATCHING
      Mariya Paul, Sheena S – Cochin University of Science and Technology Kochi,  Kerala, India.
      Page No: 71-81
      DOI:19.18001.AJCT.2019.V12I7.19.10009
 
11. Implementation of Taguchi Based Utility Approach for the Optimization of Drilling Process Parameters
      Ch. Dipak Kumar, V. Bindu Neeharika, Ch. Maheswara Rao – ANITS, Visakhapatnam
      Page No: 82-90
      DOI:19.18001.AJCT.2019.V12I7.19.10010
 
12. PROMOTION OF ENTREPRENEURSHIP THROUGH EFFECTUATION PROCESS – ROLE OF INFORMAL FINANCE
      Mamatha S and Dr. Subramanyam Mutyala – REVA University, Bangalore.
      Page No: 91-99
      DOI:19.18001.AJCT.2019.V12I7.19.10011
 
13. “A STUDY OF OPERATING EFFICIENCY OF INDIAN SCHEDULED COMMERCIAL BANKS: A COMPARATIVE ANALYSIS”
       Dr. Suchita Shukla, Shadab Alam – STEP-HBTI (KANPUR)
       Page No: 100-110
       DOI:19.18001.AJCT.2019.V12I7.19.10012
 
14. Optimization of MRR and Ra Using Multiple Regression and Artificial Neural Network (ANN) Methods
      D.Sridevi, Ch.Maheswara Rao, B.Nagaraju – ANITS, Vsp, A.P., India.
      Page No: 111-118
      DOI:19.18001.AJCT.2019.V12I7.19.10013
 
15. A Review on various feature extraction techniques for Brain Tumor Detection and Classification
      Preeti Arora, Dr. Rajeev Rattan – MVN University Palwal, Haryana, India.
      Page No: 119-130
      DOI:19.18001.AJCT.2019.V12I7.19.10014
 
16. TRANSIENT THERMAL ANALYSIS ON GAS TURBINE ROTOR BLADE BY USING FEA
      MANJUNATH, Dr.T.P.BHARATHESH, Mr.PRAVEEN.D.N. – Akshaya institute of technology, Tumakuru, Karnataka, India.
      Page No: 131-144
      DOI:19.18001.AJCT.2019.V12I7.19.10015
 
17. Empirical Study on Innovative Techniques of Motivation for Employee Retention: Comparative Study of Jet Airways and Indigo Airlines at Lucknow
      Neha Nazneen Siddiqui, Gaurav Bisaria – Integral University, Kursi Road, Lucknow, Uttar Pradesh, India.
      Page No: 145-156
      DOI:19.18001.AJCT.2019.V12I7.19.10016
 
18. Integration of Supply Chain Management in Import Oriented Industries and inherent problem and probable solutions
      Ankur Saran, Bineet Sinha – MVN University, Palwal, Haryana, India
      Page No: 157-165
      DOI:19.18001.AJCT.2019.V12I7.19.10017
 
19. A Survey on Protocols for Co-operative Communication
      Prerna Agrawal, Hardesh Kumar – Shree Digamber Institue of Technology, Dausa
      Page No: 166-170
      DOI:19.18001.AJCT.2019.V12I7.19.10018
 
20. CONTROLLING DIRECTIONS OF AN AUTOMATED CAR BASED ON IOT
      Aisha khatoon , Zeenath – Nawab Shah Alam Khan College of Engineering and Technology, New Malakpet, Hyderabad, Telangana, India.
      Page No: 171-175a
      DOI:19.18001.AJCT.2019.V12I7.19.10019
 
21. A Design of Dynamic Voltage Restorer (DVR) With Battery Energy Storage System
       Dr. P.Vasudeva Naidu*, P.Anil Kumar**, GVSSNS Sarma***, Tejaswi*, Nikitha**
       Matrusri Engineering College, Hyderabad, Telangana, India.
       Page No: 176-183
       DOI:19.18001.AJCT.2019.V12I7.19.10020
 
22. MARKETING OF COLLEGE FEMALE STUDENTS BUYING BEHAVIOUR TOWARDS COSMETICS PRODUCTS
       Dr.T.MALATHI, R.SANGEETHA
       Poompuhar College (Autonomous), Melaiyur-609 107, Nagapattinam district, Tamilnadu.
       Page No: 184-189
       DOI:19.18001.AJCT.2019.V12I7.19.10021
 
23. DOMESTIC VIOLENCE AGAINST WOMEN IN INDIA: AN EMPIRICAL STUDY ON THE EXISTING SOCIO- LEGAL FRAMEWORK WITH SPECIAL REFERENCE TO JALANDHAR AND HOSHIARPUR IN THE STATE OF PUNJAB
      Dr. Arshi Pal Kaur – Guru Nanak Dev University, Regional Campus, Gurdaspur
      Page No: 190-205
      DOI:19.18001.AJCT.2019.V12I7.19.10022
 
24. Fabrication and Mechanical Properties Evaluation of Banana and Coir Fiber Reinforced Green Composites
      Vishal J. Pandya, Pravin P. Rathod
      Shantilal Shah Engineering College, Bhavnagar Gujarat Technological University, Gujarat.
      Page No: 206-215
      DOI:19.18001.AJCT.2019.V12I7.19.10023
 
25. A NOVEL APPROACH OF A-LAW AND MU-LAW COMPANDING FOR PAPR REDUCTION OF FBMC-OQAM SYSTEM
      Puvvada Naga Venkata Durga Prasad, Gudivaka Mahesh – Bhimavaram Institute Of Engineering And Technology, Pennada, West Godavari,
      Andhra Pradesh, INDIA
      Page No: 216-222
      DOI:19.18001.AJCT.2019.V12I7.19.10024
 
26. DEVELOPMENT OF DOOR ACCESSING SYSTEM USING DIGITAL IMAGE PROCESSING
      D.Akhila , G.Sreenivasa Rao – Vidya Jyothi Institute of Engineering and Technology, Aziznagar, Moinabad, Rangareddy, Telangana, India.
      Page No: 223-226
      DOI:19.18001.AJCT.2019.V12I7.19.10025
 
27. School Culture and School Climate: Who is impacting whom?
      Vandana Singh, Anubhuti Dubey – Deen Dayal Upadhyaya Gorakhpur University, Gorakhpur (U.P.), India.
      Page No: 227-237
      DOI:19.18001.AJCT.2019.V12I7.19.10026
 
28. TRANSIENT THERMAL ANALYSIS ON GAS TURBINE ROTOR BLADE BY USING FEA
      MANJUNATH, Mr.PRAVEEN.D.N., Mr.LOHITESH JAGA KUMAR, Dr.T.P.BHARATHESH – Akshaya institute of technology, Tumakuru, Kamataka, India
      Page No: 238-252
      DOI:19.18001.AJCT.2019.V12I7.19.10027
 
29. BER PERFORMANCE METRIC OF MIMO-STBC-OFDM GADGET WITH M-QAM MODULATION THE USAGE OF ERROR CONTROL CODES FOR MORE RELIABILITY
      I. Pradeep Kumar, Mr. Bala Thimmaiah – Vasavi College of Engineering, Ibrahimbagh, Hyderabad, Telangana, INDIA
      Page No: 253-259
      DOI:19.18001.AJCT.2019.V12I7.19.10028
 
30. An overview of trade union and its cultivation in West Bengal
      Sudipta Adhikary a, Dr. Rita Biswas b – Brainware University,Kolkata, West bengal, India.
      Page No: 260-266
      DOI:19.18001.AJCT.2019.V12I7.19.10029
 
31. Android Application Framework and the Working Principal of Android Applications
      1Goskula Jayachandra 2Dr. K Suresh Babu – JNTUH, kukatpally, Hyderabad.
      Page No: 267-272
      DOI:19.18001.AJCT.2019.V12I7.19.10030
 
32. Small Tea Cultivation: A Case of West Bengal in India Arpita Dey
      Alumnae  – Vidyasagar University, Midnapore, West Bengal, India.
      Nirmal Chandra Roy – The University of Burdwan, West Bengal, India.
      Page No: 273-278
      DOI:19.18001.AJCT.2019.V12I7.19.10031
 
33. ENERGY MONITORING AND CONTROL USING INTERNET OF THINGS (IOT) SYSTEM
      GADILA SWATHI 1, RAKESH DASARI 2 – Dhulipalla, Sattenapalli, Guntur, Andhra Pradesh, India.
      Nirmal Chandra Roy – The University of Burdwan, West Bengal, India.
      Page No: 279-283
      DOI:19.18001.AJCT.2019.V12I7.19.10032
 
34. Perception of women’s customers’ satisfaction towards branded herbal cosmetic products in Hyderabad city.
      Ismailamiya 1* and Dr.P.Ashok Kumar 2 – AVS Arts & Science College Salem, 2 Sri Vasavi College, Erode. (Tamilnadu)
      Page No: 284-293
      DOI:19.18001.AJCT.2019.V12I7.19.10033
 
35. An Analysis of Gross Enrolment Ratio in Different Stages of Education in India.
      Dr.S.Palani – Mannar Thirumalai Naicker College, Madurai.
      P.Kohila – Arumugam Pillai Seethai Ammal College, Thiruppathur
      Page No: 294-300
      DOI:19.18001.AJCT.2019.V12I7.19.10034
 
36. A STUDY OF THE EFFECT OF BRANDING ON CONSUMER BUYING BEHAVIOR WITH RESPECT TO BRANDS IN FASHION INDUSTRY”
      Dr. Nehaa Tripathi – SAGE University Indore, Trisha Shukla – Mayo College Girls School, Ajmer
      Page No: 301-311
      DOI:19.18001.AJCT.2019.V12I7.19.10035
 
37. ASSESSMENT OF SERVICE QUALITY ON CUSTOMER SATISFACTION IN FIVE STAR HOTELS IN CHENNAI CITY
      S.Sekar, Dr.B.Sudha – niversity College of Arts and Science, Pappireddipatti, Dharmapuri-Dt, Tamilnadu
      Page No: 312-321
      DOI:19.18001.AJCT.2019.V12I7.19.10036
 
38. A STUDY ON MOTIVATION, BUSINESS PRACTICE AND PROBLEMS OF MICRO ENTREPRENEURS – SPECIFIC FOCUS ON STREET VENDORS
      DR.P.ANBUOLI – MANNAR THIRUMALAI NAICKER COLLEGE, PASUMALAI, MADURAI, TAMILNADU.
      Page No: 322-330
      DOI:19.18001.AJCT.2019.V12I7.19.10037
 
39. IMPACT OF E-BANKING ON CUSTOMER SATISFACTION – A STUDY WITH REFERENCE TO COMMERCIAL BANKS
      Sandhya.S, Dr. T. Srinivasan, Dr. S. Muralidhar – Annamalai University, Annamalai Nagar, Government First Grade College, Kolar District, Karnataka
      Page No: 331-343
      DOI:19.18001.AJCT.2019.V12I7.19.10038
 
40. Labour Welfare Practice and Ownership Pattern of Tea Plantations in West Bengal, India
      Nirmal Chandra Roy, Dr. Debasish Biswas – The University of Burdwan, West Bengal, India, Vidyasagar University, West Bengal, India
      Page No: 344-350
      DOI:19.18001.AJCT.2019.V12I7.19.10039
 
41. FACTORS INFLUENCING CARDAMOM PLANTERS TO START PLANTATION IN KERALA
      B.Sudha and R.Ramprabu – Periyar Constituent College of Arts and Science, Pappireddipatti.
      Page No: 351-363
      DOI:19.18001.AJCT.2019.V12I7.19.10040
 
42. PERFORMANCE OF INDIAN CARDAMOM INDUSTRY – AN ANLAYSIS
      B.Sudha and R.Ramprabu – Periyar Constituent College of Arts and Science, Pappireddipatti.
      Page No: 364-379
      DOI:19.18001.AJCT.2019.V12I7.19.10041
 
43. THE EFFECT OF SERVICE QUALITY ON CUSTOMER SATISFACTION TOWARDS STAR HOTELS IN TAMILNADU
      S.SEKAR, DR.B.SUDHA – PERIYAR UNIVERSITY CONSTITUENT COLLEGE OF ARTS AND SCIENCE PAPPIREDDIPATTI,
      DHARMAPURI (DISTRICT) (TAMILNADU, INDIA)
      Page No: 380-392
      DOI:19.18001.AJCT.2019.V12I7.19.10042
 
44. “ROLE OF ORGANIZATIONAL CLIMATE AND JOB PERFORMANCE IN HOSPITAL”
       Dr. S. Sivaraj Murugan – Annamalai University
       Page No: 393-401
       DOI:19.18001.AJCT.2019.V12I7.19.10043
 
45. Handling the Relay Transmission Problem from the Perspective of Game Models
      M.Saritha, N.Vijay Kumar – Loyola Institute of Technology and Management, Sattenapalli, Guntur.
      Page No: 402-408
      DOI:19.18001.AJCT.2019.V12I7.19.10044
 
46. BLENDED LEARNING APPROACH: OPTIMIZING LEARNING AND EMPLOYABILITY OF STUDENTS OF TECHNICAL INSTITUTIONS
      Dr. PUSULURI SREEHARI – Malla Reddy Engineering College (Autonomous), Hyderabad
      Page No: 409-414
      DOI:19.18001.AJCT.2019.V12I7.19.10045
 
47. COMPREHENSIVE REVIEW ON USE OF CANAL CONCRETE LINING EXAMINING FUNDAMENTAL PROBLEMS IN IRRIGATION SYSTEM
      G.MADAN MOHAN REDDY – Mallareddy Institute of Technology, Maisammaguda, Dhullapally, Post Via Kompally, Secunderabad, Teangana. India.
      Page No: 415-421
      DOI:19.18001.AJCT.2019.V12I7.19.10046
 
48. A study on Gamification and its effect in changing rules of compensation system
      Archita Banerjee, Dr Shantanu Mazumder – Maulana Abul Kalam Azad University of Technology,Kolkata,West Bengal,India, IMS Business School
      Page No: 422-425
      DOI:19.18001.AJCT.2019.V12I7.19.10047
 
49. NEURO –ECONOMIC ‘AGENT’ IN BUSINESSTRANSFORMATION
      Colonel (Dr.) Jyotirmaya Satpathy, Prof (Dr) Julie S. Banerji – National Defence Academy, Pune (India), International School of
       Management (ISM), Patna, Bihar, (India)
       Page No: 426-442
       DOI:19.18001.AJCT.2019.V12I7.19.10048
 
50. CHANGES IN FINANCIAL PERFORMANCE OF TRADITIONAL INTERMEDIATRIES FOR FINANCIAL INNOVATION
      RAJNISH KLER – MOTILAL NEHRU COLLEGE (EVENING), UNIVERSITY OF DELHI , NEW DELHI
      Page No: 443-453
      DOI:19.18001.AJCT.2019.V12I7.19.10049
 
51. EXPLORATIONS IN MANAGERIAL LENDING BEHAVIOUR
      Colonel (Dr.) Jyotirmaya Satpathy, Professor (Dr) D P Mishra – National Defence Academy, Pune, Fakir Mohan University (India).
      Page No: 454-461
      DOI:19.18001.AJCT.2019.V12I7.19.10050
 
52. INDIAN PERSPECTIVE ON DIVIDEND POLICY AND SHARE PRICE VOLATILITY
      ARSHID AHMAD BHAT, FAYAZ AHMAD NIKA – CENTRAL UNIVERSITY OF KASHMIR
      Page No: 462-472
      DOI:19.18001.AJCT.2019.V12I7.19.10051
 
53. SELF-ESTEEM OF SUBSTANCE ABUED CHILDREN IN VIJAYAPURA CITY
      Praveenkumar, Gangadhar B Sonar – Rani Channamma University, Belagavi.,  Karnataka State Akkamahadevi Women’s University, Vijayapura.
      Page No: 473-481
      DOI:19.18001.AJCT.2019.V12I7.19.10052
 
54. EFFECT OF IRREGULARITY SHAPE ON FLAT SLAB MULTISTOREY BUILDING UNDER LATERAL LOADING USING ETABS
      Khaja Ateequddin1, waseemsohail2 – Lords institute of engineering & technology, Himayathsagar, Hyderabad, Telangana, India.
      Page No : 483-491
      DOI:19.18001.AJCT.2019.V12I7.19.10053
 
55. A STUDY ON JOB SATISFACTION OF EMPLOYEES IN CO-OPERATIVE SUGAR MILLS IN TAMILNADU
      Dr.V.Pasupathi, S.Sakthivel – Periyar University College of Arts and Science, Pappireddipatti, Dharmapuri(Dt), Tamilnadu
      Page No : 492-499
      DOI:19.18001.AJCT.2019.V12I7.19.10054
 
56. BORROWING WORDS IN INDIA TODAY NEWS HEADLINES
      Dr. P. Sarath Chandra, Assistant professor – Maulana Azad National Urdu University, Hyderabad.
      Page No : 500-506
      DOI:19.18001.AJCT.2019.V12I7.19.10055
 
57. Investigation Occupational Hand Arm vibration exposure among drop forging workers
      Kamaljeet Bhambri, Ishbir Singh, Harwinder Singh, Tejeet Singh – IKGPTU, Jalandhar, Punjab, India, Chandigarh University, Ghuran, Punjab,
      India, GNDEC, Ludhiana, Punjab, India, SBSSTC, Ferozepur, Punjab, India.
      Page No : 507-512
      DOI:19.18001.AJCT.2019.V12I7.19.10056
 
58. Discomfort for Drop forging subjects by Vertical Whole body Vibration
      Kamaljeet Bhambri, Ishbir Singh, Harwinder Singh, Tejeet Singh – IKGPTU, Jalandhar, Punjab, India, Chandigarh University, Ghuran, Punjab,
      India, GNDEC, Ludhiana, Punjab, India, SBSSTC, Ferozepur, Punjab, India.
      Page No : 513-517
      DOI:19.18001.AJCT.2019.V12I7.19.10057
 
59. Investigating Barriers to Energy Efficiency in Steel Rolling Industries of Mandi Gobindgarh
      Anil Kumar,  Vijay Kumar, Balkar Singh – IKGU, Jalandhar, Punjab, Chitkara University, Chandigarh, IKGU, Jalandhar
      Page No : 518-528
      DOI:19.18001.AJCT.2019.V12I7.19.10058
 
60. Effect of Jet Velocity and Angle of Impact on Slurry Erosion Rate of Steels and Super alloys
      Jasbir Singh, Amrinder Pal Singh – Desh Bhagat University, Mandi Gobindgarh, Punjab, University Institute of Engineering and Technology,
      Panjab University, Chandigarh, India
      Page No : 529-536
      DOI:19.18001.AJCT.2019.V12I7.19.10059
 
61. CFD analysis of heat transfer performance of a car radiator using nanofluid
      Gaurav Gautam, Anjali Gupta, Rajesh Kumar – PEC , Chandigarh, UIET, Panjab University Chandigarh
      Page No : 537-545
      DOI:19.18001.AJCT.2019.V12I7.19.10060
 
62. A review on controllable parameters of metal matrix composite development and their optimization
       Harinder Singh, Amandeep Singh Wadhwa, Amit Chauhan – University Institute of Engineering and Technology, Sector-25, Panjab University,
       Chandigarh, India
       Page No : 546-556
       DOI:19.18001.AJCT.2019.V12I7.19.10061
 
63. A State of Art on Hybrid approaches of Abrasive Flow Machining with their applications Using Abrasive Particulates
      Vipin Kumar Sharma, Vinod Kumar, Ravinder Singh Joshi – Thapar University Patiala, Punjab India
      Page No : 557-564
      DOI:19.18001.AJCT.2019.V12I7.19.10062
 
64. Optimization of Rotary EDM Process Parameters for Machining of Monel 400 Alloy
      Naveen Chaubey, Partap Singh Samra – Sri Guru Granth Sahib World University, Fatehgarh Sahib, Punjab, India.
      Page No : 565-570
      DOI:19.18001.AJCT.2019.V12I7.19.10063
 
65. Applicability for Determination of Color Sorting Machine in Industry
      Rahul Dhiman, Manmeet Singh, Munish, Gurpreet S. Malhi, Dr. Jaswanti – Chandigarh Engineering College Chandigarh Group of Colleges
      Campus, Landran, Punjab. India
      Page No : 571-576
      DOI:19.18001.AJCT.2019.V12I7.19.10064
 
66. Design, Modelling and Shear analysis of micro-sized piezoelectric quartz crystal for oscillators and mircobalances
      Sumeet Goyal, Rahul Kakkar, Sohni Singh, Joginder Singh, Harjinder Singh – CGC College of Engineering Landran, Punjabi University, Patiala
      Page No : 577-586
      DOI:19.18001.AJCT.2019.V12I7.19.10065
 
67. Optimization of Process Parameters during Minimum Quantity Lubrication Assisted Turning of Biocompatible Ti-6Al-7Nb alloy
      Anuj Sharma, Anjali Gupta, Rajesh Kumar – UIET, Panjab University, Chandigarh, India
      Page No : 587-592
      DOI:19.18001.AJCT.2019.V12I7.19.10066
 
68. Powder mixed EDM: A surface modification method for metallic biomaterials
      Gaurav Kumar Sharma – Punjab Engineering College, Chandigarh, India
      Page No : 593-598
      DOI:19.18001.AJCT.2019.V12I7.19.10067
 
69. Design Process: Past, Present and Future
      Sukhwinder S. Chahal, Kristian T. Bailey, Rachin Goyal, Vinod Kumar Rohilla – MIE, Australia, CAD Designer, Downer EDI Ltd, Maryborough,
      Australia, Chandigarh Engineering College, Landarn, Punjab, India
      Page No : 599-604
      DOI:19.18001.AJCT.2019.V12I7.19.10068
 
70. Robust based PSS using ACO for Small Signal Stability
      Monika, Balwinder Singh, Rintu Khanna – PEC (Deemed to be University), Chandigarh
      Page No : 605-614
      DOI:19.18001.AJCT.2019.V12I7.19.10069
 
71. Analysis of PMEDM Parameters Involved In Machining Process of Inconel-800 Material through Taguchi Methodology
      Er. Ashwani Sharma, Kamal Kumar Gautam, Vivek Singh, Rachit Singh, Lokender Verma – Green Hills Engineering College, Kumarhatti,
      solan (HP) India
      Page No : 615-620
      DOI:19.18001.AJCT.2019.V12I7.19.10070
 
72. Barriers to Energy Efficiency in Mohali Manufacturing Cluster
      Anil Kumar – Indo Global Engineering College, Mohali, Punjab, India
      Page No : 621-626
      DOI:19.18001.AJCT.2019.V12I7.19.10071
 
73. Recent Developments and Comprehensive Review on Water Cooling Techniques for PV Panels
      Ashish Dhull, Munish Gupta, Puneet Katyal, Himanshu Manchanda, Mahesh Kumar – Guru Jambheshwar University of Science and Technology, Hisar
      Page No : 627-632
      DOI:19.18001.AJCT.2019.V12I7.19.10072
 
74. A review on synthesis and heat transfer applications of carbon nanotubes nanofluid
      Neeti Arora, Munish Gupta – Guru Jambheshwar University of Science and Technology, Hisar, Haryana, India
      Page No : 633-640
      DOI:19.18001.AJCT.2019.V12I7.19.10073
 
75. TO EVALUATE THE IMPORTANCE OF SIX SIGMA IN TELECOMMUNICATION INDUSTRY
      Ramanjeet Singh, Balvinder Singh – Adesh Institute of Engineering and Technology, Gharuan, Punjab, India
      Page No : 641-644
      DOI:19.18001.AJCT.2019.V12I7.19.10074
 
76. Lean Six Sigma: A Literature Review
      Narender Kumar, S. K. Jarial, M. S. Narwal – Deenbandhu Chhotu Ram University of Science& Technology Murthal, Sonepat (India)
      Page No : 645-668
      DOI:19.18001.AJCT.2019.V12I7.19.10075
 
77. Customised Daylight System with Light Collimator
      Guramandeep Singh, Jaswinder Singh Mehta, Dr. Harry Garg, Karanvir Sharma – Panjab University, Chandigarh, CSIR-CSIO Chandigarh
      Page No : 669-678
      DOI:19.18001.AJCT.2019.V12I7.19.10076
 
78. Performance Analysis Comparison of AISI-202 and AISI-304 Stainless Steels Using Taguchi Methodology
      Kamal Kumar Gautam – Green Hills Engineering College, Solan, India
      Page No : 679-685
      DOI:19.18001.AJCT.2019.V12I7.19.10077
 
79. Review on process parameters of WEDM
      Shubham Sharma, Er. Ashwani Sharma – Green Hills Engineering College Kumarhatti solan (HP) India
      Page No : 686-692
      DOI:19.18001.AJCT.2019.V12I7.19.10078
 
80. Transmission System in Automobiles:A Review
      Anand Sharma, EmailParveen Goyal – UIET, Panjab University, Chandigarh, India
      Page No : 693-697
      DOI:19.18001.AJCT.2019.V12I7.19.10079
 
81. Prioritization of Critical Success Factors using Fuzzy and Fuzzy TOPSIS for successful implementation of Lean and Six-Sigma in Process Industry
      Mahesh kumar, Dr. M.S Narwal, Jaswant singh and Aladeen Khan – DCRUST Murthal Sonipat
      Page No : 698-706
      DOI:19.18001.AJCT.2019.V12I7.19.10080
 
82. Taguchi based optimization-machining parameters during machining of Berliyium Copper alloys for better surface finish
      Rajesh Kumar, Ram Narayan, Amresh Kumar, Rajdeep Singh – SDDIET, KU University,Panchkula, Harayana, CEC Landran, Mohali, India,
      Chandigarh Engineering College, Landran, India
      Page No : 707-712
      DOI:19.18001.AJCT.2019.V12I7.19.10081
 
83. Role of Supply Chain Management in Northern Indian Industries
      Simranjit Singh Sidhu, Tavinder Pal Singh, Rupinder Singh – Punjabi University, Patiala
      Page No : 713-720
      DOI:19.18001.AJCT.2019.V12I7.19.10082
 
84. Analytical Prediction of Stability Lobes in Drilling in Bending Including Gyroscopic Effect
      Jitender Kapoor, Archana Thakur – National Institute of Technology Karnataka, CGC Landran
      Page No : 721-729
      DOI:19.18001.AJCT.2019.V12I7.19.10083
 
85. Effect of sliding velocity on wear behaviour and coefficient of friction of walnut shell powder/polyester composites
      Mukesh Kumar, Vishal Ahlawat, Vishal Sharma, Manish Kumar, Manjit Singh –  U.I.E.T., Maharshi Dayanand University, Rohtak (India),  
      Chandigarh Engineering College, Landran, Mohali
      Page No : 730-739
      DOI:19.18001.AJCT.2019.V12I7.19.10084
 
86. Comparative Study with and without the Effect of Powder Mixed Dielectric on Performance Measures in EDM
      Dr. Satish Kumar, Dr. Sanjeev Kumar, Dr. Virender Chahal – Chandigarh Engineering College, Landran, Punjab, India
      Page No : 740-749
      DOI:19.18001.AJCT.2019.V12I7.19.10085
 
87. Effect of Varying Surface Grinding Parameters on the Surface Roughness of Die Steel
      Aishna Mahajan, Satish Kumar – Chandigarh Engineering College, Landran (Mohali), Punjab, India
      Page No : 750-756
      DOI:19.18001.AJCT.2019.V12I7.19.10086
 
88. Selection of Most Critical Industrial Wastes: A Literature Study
      Dr. Virender Chahal and Dr. Sanjeev Sharma and Dr. Satish Kumar – Chandigarh Collage of Engineering, Landran, Mohali, Punjab, India
      Page No : 757-762
      DOI:19.18001.AJCT.2019.V12I7.19.10087
 
89. Fabrication and Characterization of Hybrid GFRP
      Rahul Mehra, Sachin Mohal, B. Lonia – IK Gujral Punjab Technical University, Kapurthala, Punjab, India, CEC, Landran, Punjab, India,
      Uttaranchal University, Dehradun, India
      Page No : 763-770
      DOI:19.18001.AJCT.2019.V12I7.19.10088
 
90. Investigations on Machining Characteristics of Ti-6Al-4V Titanium Alloys using EDM
      Sanjeev Kumar, Satish Kumar, Virender Chahal – Chandigarh Engineering College, Landran
      Page No : 771-776
      DOI:19.18001.AJCT.2019.V12I7.19.10089
 
91. Single and Sequential Double Sided Friction Stir Welding of Aluminum Alloy AA 1100
      Dr. Vinod Kumar Rohilla, Dr. Rachin Goyal, Amresh Kumar, Dr. Sachin Mohal – Chandigarh Engineering College, Landran , Mohali, (Pb.)
      Page No : 778-784
      DOI:19.18001.AJCT.2019.V12I7.19.10090
 
92. Investigation of mechanical properties of Al6061/Al2O3-SiC composites fabricated by stir casting
      Sachin Mohal, Ashish Sharma, Rajesh Sharma, Vinod Kumar Rohilla, Rachin goyal – CEC, Landran, Punjab, India
      Page No : 785-791
      DOI:19.18001.AJCT.2019.V12I7.19.10091
 
93. Optimization of parameters during turning of EN 24 steel with Minimum Quantity Lubrication
      Archana Thakur, Alakesh Manna, Sushant Samir – Punjab engineering college (Deemed to be university) Chandigarh, India
      Page No : 792-800
      DOI:19.18001.AJCT.2019.V12I7.19.10092
 
94. Experimental study on hot die steel tool HS21 using coated and uncoated brass wire on WEDM
      Harvinder Singh Rattan, Rajdeep Singh, Rajender Singh, Puneet Katyal, Akash – Chandigarh Group of Colleges, Landran,  Guru Jambheshwar
      University of Science and Technology, Hisar
      Page No : 801-816
      DOI:19.18001.AJCT.2019.V12I7.19.10093
 
95. Selection of Range of Peak Current during Cryogenically Assisted Electric Discharge Machining
      Rachin Goyal, Vinod Kumar Rohilla, Amresh Kumar, Sachin mohal – Chandigarh Engineering College, Landarn, Punjab, India
      Page No : 817-821
      DOI:19.18001.AJCT.2019.V12I7.19.10094
 
96. An experimental investigation of solar air collector with plain and corrugated absorber plate
      Suman Debnath, Pradeep Bishnoi – Chandigarh Engineering College
      Page No : 822-829
      DOI:19.18001.AJCT.2019.V12I7.19.10095
 
97. Experimental optimization of Gas Flow Rate and Current Intensity for TIG Welding of Aluminium Alloy- 2014
      Ramandeep Singh, Sukhjinder Singh, Vikas Kaushik – Chandigarh Engineering College, Landran, Punjab, India
      Page No : 830-836
      DOI:19.18001.AJCT.2019.V12I7.19.10096
 
98. Experimental Investigation of Solar Still with Heat Storage Materials
      Vikrant, Gurkirat Singh – CGC Landran
      Page No : 837-847
      DOI:19.18001.AJCT.2019.V12I7.19.10097
 
99. Investigation of Micro Hardness and Microstructure of Microwave Welded Joint on EN-08
      Gurkirat Singh, Gurpreet Singh Malhi, Taljeet Singh – CEC, Landran ,Punjab ,India
      Page No : 848-851
      DOI:19.18001.AJCT.2019.V12I7.19.10098
 
100. An Experimental Investigation on Tribological Performance of Graphite Grease
       Prabhat Kumar, Rakesh Kumar, Santosh Kumar – Chandigarh Group of Colleges, Landran, Mohali, Punjab, India.
       Page No : 853-859
       DOI:19.18001.AJCT.2019.V12I7.19.10099
 
101. Frictions Stir Process Tool for Surface Modification of Different Alloy: A Review
       RakeshKumar, Prabhat Kumar, Prabhat Kumar – Chandigarh University, Gharuan, Mohali, Punjab, India.
       Page No : 860-868
       DOI:19.18001.AJCT.2019.V12I7.19.10100
 
102. Effect of cryogenic treatment on tool steel and machining parameters: A review
        Aneesh Goyal, Dr. Sushil Mittal, Rajdeep Singh, Harvinder Singh, Jeewan Singh – Chandigarh Group of Colleges, Landran, India, Chandigarh
        University, Gharuan, India
        Page No : 869-874
        DOI:19.18001.AJCT.2019.V12I7.19.10101
 
103. A Scientific Approach on Thermally Induced Vibrations of Nonhomogeneous Tapered Rectangular Plate
        Pooja Singhal, Ruby – Chandigarh Engineering College, Landran, Mohali, Punjab, India, BB Panjab university Constituent College, Balachaur,
        Punjab, India
        Page No : 875-882
        DOI:19.18001.AJCT.2019.V12I7.19.10102
 
104. Calcium Chloride Based Liquid Desiccant Dehumidification System-An Influence of Packing Height
        Satwinder Singh, Swarn Singh – Chandigarh Group of Colleges, Landran (Mohali), Punjab, India
        Page No : 884-891
        DOI:19.18001.AJCT.2019.V12I7.19.10103
 
105. Increasing the Efficiency of CNC Turning Machine
        Priyaansh Parsad, Varun Arora – Chandigarh Engineering College, Landran Punjab Technical University
        Page No : 892-899
        DOI:19.18001.AJCT.2019.V12I7.19.10104
 
106. Overview of Wire Arc Spray Process: A Review
        Santosh Kumar, Amit Handa, RakeshKumar – IKG Punjab Technical University, Kapurthala, Punjab, India., Chandigarh Group of Colleges,
        Landran, Mohali, Punjab, India
        Page No : 900-907
        DOI:19.18001.AJCT.2019.V12I7.19.10105
 
107. Thermal and Mechanical Fatigue Loading Analysis of Exhaust Manifold
        Sandeep Singh Sangwan, Sachin Mohal, Arvind Kumar – Chandigarh Engineering College, Landran, Mohali (Punjab)
        Page No : 908-912
        DOI:19.18001.AJCT.2019.V12I7.19.10106
 
108. EFFECT OF COPPER AND SILICON ADDITION ON TENSILE STRENGTH OF AUSTEMPRED DUCTILE IRON
        Vikas Kaushik, Sukhjinder Singh, Ramandeep Singh – Chandigarh Engineering College, Landran, Punjab, India
        Page No : 913-917
        DOI:19.18001.AJCT.2019.V12I7.19.10107
 
109. Investigation of Micro Hardness and Microstructure of Microwave Welded Joint on EN-08
       Gurkirat Singh, Gurpreet Singh Malhi, Taljeet Singh – CEC, Landran ,Punjab ,India
       Page No : 918-923
       DOI:19.18001.AJCT.2019.V12I7.19.10108
 
110. Modeling and Analysis of Electro statically Actuated Polysilicon Cantilever MEMS Device
       Swarn Singh, Manvinder Sharma, Satwinder Singh, Virat Khanna, Dishant Khosla – CGC College of Engineering, Landran, (Mohali), Punjab,
       India. Maharaja Agrasen University, Baddi, Himachal Pradesh, India
       Page No : 924-930
       DOI:19.18001.AJCT.2019.V12I7.19.10109
 
111. CREEP BEHAVIOUR OF A FUNCTIONALY GRADED ROTATING DISC WITH CONSTANT THICKNESS: A REVIEW
        Rupinder Singh, TavinderPal Singh – Chandigarh Engineering College, Landran, Mohali, Punjab, India
        Page No : 931-942
        DOI:19.18001.AJCT.2019.V12I7.19.10110
 
112. A Study of SS Cladding with SAW process by changing welding parameters
        Avtar Singh, Taljeet Singh, Gurpreet Singh – Chandigarh Engineering College, Landran, Mohali, INDIA
        Page No : 943-950
        DOI:19.18001.AJCT.2019.V12I7.19.10111
 
113. Analysis of Rotavator Blades for its Enhanced Performance Against Abrasive Wear Using Hard Facing
        Gagandeep Singh, Farman Khan, Ravinder Singh – CEC, Landran, Mohali, India
        Page No : 951-958
        DOI:19.18001.AJCT.2019.V12I7.19.10112
 
114. Effects of Multipass FSW on Mechanical and Metallurgical Properties of Aluminium 6061 Alloy
        Ravinder Singh, Farman Khan, Gagandeep Singh – CEC, Landran, Mohali, India
        Page No : 959-965
        DOI:19.18001.AJCT.2019.V12I7.19.10113
 
115. Design OptimizationofAISI 8620 Alloy Steel Tie Rod With Using CAD/CAE Tools
        Farman Khan, Sangram Singh thakur, Gagandeep SinghSandhu, Ravinder Singh – CEC, Landran, Mohali, India
        Page No : 966-972
        DOI:19.18001.AJCT.2019.V12I7.19.10114
 
116. Design and Fabrication of Prosthetic Leg
        Harsimran Jeet Singh Sidhu, Santosh Kumar – Chandigarh Group of Colleges, Landran, Mohali, Punjab, India., IKG Punjab Technical
        University,Kapurthala, Punab, India.
        Page No : 973-981
        DOI:19.18001.AJCT.2019.V12I7.19.10115
 
117. Process parameters optimization of Wire-cut Electric Discharge Machining: A Review
        Pawan Nain, Arvind, Mohit Kumar Mishra, Mohd Jafar, Mrityunjaya Vashishtha, NamanGoyal – Chandigarh Engineering College, Landran,
        Punjab, India
        Page No : 982-996
        DOI:19.18001.AJCT.2019.V12I7.19.10116
 
118. Comparative analysis between UPWIND and QUICK finite difference approach considering thermal diffusion
        Dr. Manjit Singh, Dr. Chanpreet Singh, Dr. D. Gangacharyulu – Chandigarh Engineering College, Landra, Mohali, Punjab, India, Thapar Institute
        of Engineering & Technology, Patiala, Punjab, India
        Page No : 997-999
        DOI:19.18001.AJCT.2019.V12I7.19.10117
 
119. Review of supply chain management in manufacturing organizations
        Tavinder Pal Singh, Simranjit Singh Sidhu – CGC, landran, Punjab,India, Punjabi University,Patiala, Punjab,India
        Page No : 1000-1007
        DOI:19.18001.AJCT.2019.V12I7.19.10118
 
120. Investigation of Kerf quality of Inconel material machined by Abrasive water jet
        Arvind Kumar, Pawan Kumar, Sandeep Sanghwan
        Page No : 1008-1015
        DOI:19.18001.AJCT.2019.V12I7.19.10119
 
121.  A review of effects of Technology-push and Demand-pull strategies on Sustainable development in manufacturing industries
         Dr. Anuj Singla, Dr. Arti Tyagi, Ms. Kiran Kaundal, Ms. Sapna – Chandigarh Engineering College, Landran, Mohali, Punjab, India
         Page No : 1016-1021
         DOI:19.18001.AJCT.2019.V12I7.19.10120
 
122. Achieving higher cutting speed in machining of Be-Cu alloy using Taguchi parameter design approach
        Amresh Kumar, Amrinder Singh, Major Singh – CEC Landran, Mohali, Punjab
        Page No : 1022-1027
        DOI:19.18001.AJCT.2019.V12I7.19.10121
 
123.  AN EXPERIMENTAL INVESTIGATION ON STUDY OF FLUID FLOW AND HEAT TRANSFER WITHIN A MICROTUBE
         Randeep Singh, Rajesh Sharma, Rajdeep Singh, Mukesh Kumar – CEC Landran, Mohali
         Page No : 1028-1035
         DOI:19.18001.AJCT.2019.V12I7.19.10122
 
124. Electrical Discharge Machining (EDM): A Review
        Ajay Sharma, Nikhil – Chandigarh Engineering college , Landran (Mohali)
        Page No : 1036-1041
        DOI:19.18001.AJCT.2019.V12I7.19.10123
 
125. Preparation and characterization of biomaterial Hydroxyapatite
        Ramandeep Singh Dhindsa – Chandigarh Engg. College, Landran, Mohali, Punjab, India
        Page No : 1042-1050
        DOI:19.18001.AJCT.2019.V12I7.19.10124
 
126. Experimental Analysis of Thermal Performance of a Solar Air Heater Having Thermal Mass (Metallic Chips)
        Satish Kumar, Aishna Mahajan – Chandigarh Engineering College, Landran (Mohali), Punjab, India
        Page No : 1051-1055
        DOI:19.18001.AJCT.2019.V12I7.19.10125
 
127. Microstructure and Tensile Strength of Dissimilar Aluminium Alloys Butt Joints Welded With Friction Stir Welding Process
        Jeewan Singh, Rajdeep Singh, Harvinder Singh, Aneesh Goyal – Chandigarh Engineering College, Landran, Punjab, India
        Page No : 1056-1061
        DOI:19.18001.AJCT.2019.V12I7.19.10126
 
128. A REVIEW PAPER OF RESISTANCE SPOT WELDING PARAMETER OF AUSTENITE STAINLESS STEEL (ASS) 316L
        RavinderjeetSingh, D.S.Sahota – UCOE, Punjabi University Patiala, Punjab
        Page No : 1062-1073
        DOI:19.18001.AJCT.2019.V12I7.19.10127
 
129. Design and Simulation of Bike Frame Using SolidWorks and ANSYS
        Durga Charan, Dr. Sanjeev Kumar Garg – Seth Jai Parkash Mukand Lal Institute of Engineering and Technology (JMIT) Radaur, Yamunanagar,
        Haryana, India
        Page No : 1074-1079
        DOI:19.18001.AJCT.2019.V12I7.19.10128
 
130. Effect of process parameters on hardness in incremental sheet metal forming process
        Narinder kumar, R.M.Belokar, Sanjeev Kumar Garg – Seth Jai Prakash Mukand Lal Instititue of Engineering and Technology ,Radaur,Haryana, India
        Page No : 1080-1085
        DOI:19.18001.AJCT.2019.V12I7.19.10129
 
131. A Comprehensive Review on Machining Characteristics of Various Process Parameters and their Responses Using Magnetically Assisted Abrasive Flow Machining (MAAFM)
        Gagandeep Chawla1, Dimple Kumar, Dr. Vinod Kuma Mittal, Dr. Surjit Angra, Dr. Sushil Mittal – National Institute of Technology, Kurukshetra,
        Haryana, India, Chandigarh University, Gharuan, Mohali, Punjab, India
        Page No : 1086-1092
        DOI:19.18001.AJCT.2019.V12I7.19.10130
 
132. Application of Grey Relational analysis in Optimization of WEDM process –A case study
        Jatinder Singh, Kulvinder Garg, Amresh Kumar – MIMIT Malout,Punjab, CEC Landran, Mohali, Punjab
         Page No : 1093-1098
         DOI:19.18001.AJCT.2019.V12I7.19.10131
 
133. Effect of Wire Feed Rate and Wire Tension on Machining Performance of Al/SiC composite
        Jaspreet Singh, Suraj Rehan, Yakun Wang, Vikas Sharma – CGC college of Engineering Landran, Mohali, Punjab
        Page No : 1099-1104
        DOI:19.18001.AJCT.2019.V12I7.19.10132
 
134. IMPACT OF CAPITAL STRUCTURE ON PROFITABILITY OF AUTOMOBILE COMPANIES IN INDIA (WITH SPECIAL REFERENCE TO TATA MOTORS LTD. AND MAHINDRA & MAHINDRA LTD.)
        V.Sureshkumar –  Government Arts College (Autonomous), Salem-7, Tamil Nadu
        Page No: 1105-1114
        DOI:19.18001.AJCT.2019.V12I7.19.10133
 
135. IMPACT OF WORKING CAPITAL ON PROFITABILITY OF AUTOMOBILE COMPANIES IN INDIA (WITH SPECIAL REFERENCE TO TATA MOTORS LTD. AND MAHINDRA & MAHINDRA LTD)
       V.Sureshkumar – Government Arts College (Autonomous), Salem-7, Tamil Nadu
       Page No: 1115-1124
       DOI:19.18001.AJCT.2019.V12I7.19.10134
 
136. FACILITATING LEARNER AUTONOMY IN WRITING THROUGH MULTIPLE INTELLIGENCES IN AN ESL CONTEXT- A CASE STUDY
        Dr.G.Raja Shekhar – Dr.VS Krishna Govt. Degree College (A), Visakhapatnam.
        Page No: 1125-1133
        DOI:19.18001.AJCT.2019.V12I7.19.10135
 
137. AN EXPERIMENTAL AND DYNAMIC ANALYSIS OF NANO WIND TURBINE
        K. MANIKANDAN, M. VAIRAVEL, N. SUNDARAMOORTHY, S. SARAVANAN – Tejatech Design solution Pvt ltd, Erode, TamilNadu.,  
        St Thomas College of Engineering and Technology, Chengannur, Kerala., Sembcorp Green Infra Ltd, Gurgaon.,  
        Muthayammal Engineering College, Rasipuram, Namakkal.
        Page No: 1134-1140
        DOI:19.18001.AJCT.2019.V12I7.19.10136
 
138. INVESTIGATIONS ON DUCTILITY BEHAVIOR OF HYBRID FIBRE REINFORCED CONCRETE SLABS
        Dr.A.ANBUCHEZIAN – AnnaPoorana Engineering College , Sankari Main Road Periya Seeragapadi, Salem, Tamil Nadu.
        Page No: 1141-1146
        DOI:19.18001.AJCT.2019.V12I7.19.10137
 
139. PLANNING AND EMPIRICAL STUDY OF ECONOMICAL BIO-MASS HEATER
        Selvaraj .M, S.Saravanan, S.VinothKumar, R.Girimurugan, C.Thiruvasagam – Gnanamani College Of Technology ,Namakkal , Tamil Nadu ,India.,
        K.S.R College of Engineering- Tiruchengode, Tamil Nadu ,India.,  Nandha College of Technology, Perundurai, TamilNadu, India.
        Page No: 1147-1155
        DOI:19.18001.AJCT.2019.V12I7.19.10138
 
140. DEVELOPMENT AND ANALYSIS OF AN OVAL-SHAPED BIKE CHASSIS
        S.Saravanan, S.VinothKumar, R.Girimurugan, C.Thiruvasagam, Selvaraj .M –  Gnanamani College Of Technology ,Namakkal , Tamil Nadu ,India.,
        K.S.R College of Engineering- Tiruchengode, Tamil Nadu ,India., Nandha College of Technology, Perundurai, TamilNadu, India.
        Page No: 1156-1162
        DOI:19.18001.AJCT.2019.V12I7.19.10139
 
141. NUMERICAL STUDIES ON THE CAVITY IN GAS OIL INJECTOR
        M.Dineshkumar, R.Manivannan, Dr.R.Mohan, S.Kavitha, Dr.M.Vairavel – PACE Institute Of Technology And Sciences ,Ongole ,Andhra Pradesh , India.
        AVS Engineering College, Salem ,Tamil Nadu ,India .
        Sona College of Technology, Salem, Tamil Nadu ,India
        Kalasalingam Academy of research and Education,Krishnankoil,Srivilliputtur, Tamilnadu, India.
        Teja Tech and Design Solutions, Erode, Tamilnadu, India.
        Page No: 1163-1176
        DOI:19.18001.AJCT.2019.V12I7.19.10140
 
142. SELF- COMPACTING CONCRETE WITH HIGH LEVELS OF FLY ASH
        Dr.V.Subramania Bharathi, Dr.K.Mohammed Imthathullah Khan, Nooreen Fatima – Lords Institute of Engineering and Technology, Hyderabad.
        Page No: 1177-1182
        DOI:19.18001.AJCT.2019.V12I7.19.10141
 
143. APPLICATIONS, CONFIDENTIALITY ANDENCRYPTION IN WLAN
        MALYADRI KORIPI – Micro Services Lead Developer, MASTECH DIGITALat client PNC, PA
        Page No: 1183-1187
        DOI:19.18001.AJCT.2019.V12I7.19.10142